## Device Configuration

These parameters apply globally to the device. For some parameters, it can be defined whether they are *Global* or *Specific*. If *Specific* is selected, the parameter is defined per channel and only applies there.

### Bus voltage recovery

All actions (e.g., switching channels or sending telegrams on the bus) are only executed after the time defined by the parameter *Delay after bus voltage recovery* has passed.

With *Switch-on brightness after bus voltage recovery*, you can configure whether and to which brightness level the channels are set after device restart.

### Status output

The status is always sent at the end of a dimming process. Additionally, with *Behavior status output*, you can define whether:

* the status is sent every X seconds during dimming, or  
* the status is sent whenever the change exceeds X percent.

If *Cyclic status output* is not set to *Off*, status messages are also sent at device startup and at the configured interval.

### Telegram rate limit

With *Telegram rate limit*, the number of telegrams per second sent by the device to the bus can be limited.
