## Alarm objects

Enables the alarm objects ***Alarm Overvoltage***, ***Alarm Undervoltage***, ***Alarm Overcurrent***, and ***Alarm Overtemperature***.  
If one of these occurs, the corresponding KO is triggered, the channel is switched off, and the yellow LED on the device lights up.  
The alarms remain active until the channel is switched on again.

Also releases the KO ***Load deviation warning***.  
This activates if the measured control curve is active and the current load deviates significantly from the measured load. The channel is not switched off in this case.

This KO can be used to detect lamp failures.